Samsung LE32A557P2F User Manual

Also see for LE32A556: User manual

Contents

English - Display Modesboth screen position and size will vary depending on the type of PC monitor and its resolution. Theresolutions in the table are recommended.D-Sub InputMode Resolution horizontalFrequency (khz)VerticalFrequency (hz)Pixel ClockFrequency (Mhz)Sync Polarity(h/V)IbM 640 x 350720 x 40031.46931.46970.08670.08725.17528.322+ / -- / +VESA640 x 480640 x 480640 x 480800 x 600800 x 600800 x 6001024 x 7681024 x 7681024 x 7681280 x 10241280 x 10241360 x 7681600 x 120031.46937.86137.50037.87948.07746.87548.36356.47660.02363.98179.97647.71275.00059.94072.80975.00060.31772.18875.00060.00470.06975.02960.02075.02560.01560.00025.17531.50031.50040.00050.00049.50065.00075.00078.750108.000135.00085.500162.000- / -- / -- / -+ / ++ / ++ / +- / -- / -+ / ++ / ++ / ++ / ++ / +CVT 1920 x 1080RB 66.587 59.934 138.500 + / -hDMI/DVI InputMode Resolution horizontalFrequency (khz)VerticalFrequency (hz)Pixel ClockFrequency (Mhz)Sync Polarity(h/V)VESA640 x 480800 x 6001024 x 7681280 x 10241360 x 7681600 x 120031.46937.87948.36363.98147.71275.00059.94060.31760.00460.02060.01560.00025.17540.00065.000108.00085.500162.000- / -+ / +- / -+ / ++ / ++ / +CEA 1920 x 1080p 67.500 60.000 148.500 + / +When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.The interlace mode is not supported.The set might operate abnormally if a non-standard video format is selected.Separate and Composite modes are supported. SOG is not supported.Too long or low quality VGA cable can cause picture noise at high resolution modes(1920x1080 or 1600x1200).➣➣➣➣➣➣➣Setting up Your PC Software (based on Windows XP)The Windows display-settings for a typical computer are shown below. Theactual screens on your PC may be different depending upon your particularversion of Windows and your particular video card. Even if your actual screenslook different, the same, basic set-up information will apply in almost all cases.(If not, contact your computer manufacturer or Samsung Dealer.)1. First, click on "Control Panel" on the Windows start menu.2. When the control panel window appears, click on "Appearance and Themes"and a display dialog-box will appear.. When the control panel window appears, click on "Display" and a displaydialog-box will appear.. Navigate to the "Settings" tab on the display dialog-box.The correct size setting (resolution): Optimum- 1920 X 1080If a vertical-frequency option exists on your display settings dialog box, the correct value is"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.