Samsung LE32A557P2F User Manual

Also see for LE32A556: User manual

Contents

English - Setting Up Anynet+The following settings are to use Anynet+ functions.Using the Anynet+ Function1. Press The TOOLS button. Then Press the ENTER button toselect "Anynet+(HDMI-CEC)".Press the ▲ or ▼ button to select "Setup", then press theENTER button.2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",then press the ENTER button.. Press the ▲ or ▼ button to select "On", then press theENTER button.The "Anynet+ (HDMI-CEC)" function is enabled.If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.When the "Anynet+ (HDMI-CEC)" function is disabled, all theAnynet+ related operations are deactivated.Turning an Anynet+ Device Off Automatically when the TV is Turned Off1. Press the ▲ or ▼ button to select "Auto Turn Off", then pressthe ENTER button.2. Press the ▲ or ▼ button to select "Yes", then press theENTER button.The Auto turn off function is enabled.If you select "No", the Auto turn off function is cancelled.Press the EXIT button to exit.The Select Device setting of the TV remote control is to be setto TV to use the Anynet+ function.If you set "Auto Turn Off" to "No", connected external devices are also turned off when the TV isturned off. However, if the device is recording, it may not be turned off.➣➣➣➣➣➣➣SetupAnynet+ (hDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsOffOnMove Enter ReturnSetupAnynet+ (hDMI-CEC) : OnAuto Turn Off : OffSearching ConnectionsNoYesMove Enter ReturnView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV PMove EnterReturnToolsAnynet+ (hDMI-CEC)Picture Mode : StandardSound Mode : CustomSleep Timer : OffSRS TS XT : OffEnergy Saving : OffDual l-ll : MonoMove Enter Exit