Samsung LE32A557P2F User Manual

Also see for LE32A556: User manual

Contents

English - 0Check Points before Requesting ServiceSymptom SolutionAnynet+ does notwork.■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+devices only.■ Connect only one receiver.■ Check if the Anynet+ device power cord is properly connected.■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.■ Check whether the TV remote control is in TV mode.■ Check whether it is Anynet+ exclusive remote control.■ Anynet+ doesn’t work at a certain condition. (Searching channels, OperatingWISELINK, Plug & Play, etc.)■ When connecting or removing the HDMI 1.3 cable, please make sure to searchdevices again or restart your TV.■ Check if the Anynet+ Function of Anynet+ device is set on.I want to startAnynet+.■ Check if the Anynet+ device is properly connected to the TV and check if theAnynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.■ Press the TV/DTV button on the TV remote control to switch to TV. Then pressthe TOOLS button to show the Anynet+ menu and select a menu you want.I want to exit Anynet+. ■ Select View TV in Anynet+ menu.■ Press the SOURCE button on the TV remote control and select a device otherthan Anynet+ devices.■ Press any of P / , Ch LIST, PRE-Ch, and such to change to theTV mode. (Note that the channel button operates only when a tuner-embeddedAnynet+ device is not connected.)The ConfiguringAnynet+ connectionmessage appears onthe screen.■ You cannot use the remote control when you are configuring Anynet+ orswitching to a view mode.■ Use the remote control when the Anynet+ setting or switching to view mode iscomplete.The Anynet+ devicedoes not play. You cannot use the play function when Plug & Play is in progress.The connected deviceis not displayed.■ Check whether or not the device supports Anynet+ functions.■ Check whether or not the HDMI 1.3 cable is properly connected.■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.■ Search Anynet+ devices again.■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMIcables may not support Anynet+ functions.■ If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3cable or power cord or a power failure, please repeat the device scan.The TV programmecannot be recorded. Check whether the antenna jack on the recording device is properly connected.The TV sound is notoutput through thereceiver.Connect the optical cable between TV and the receiver.