Samsung LE32A557P2F User Manual

Also see for LE32A556: User manual

Contents

English - Scanning and Switching between Anynet+ Devices1. Press the TOOLS button.Then press the ENTER button to select "Anynet+(HDMI-CEC)".2. Press the ▲ or ▼ button to select "Select Device", then pressthe ENTER button.. Press the ▲ or ▼ button to select to a particular device andpress the ENTER button. It is switched to the selected device.. If you cannot find a device you want, press the ▲ or ▼ button toselect "Setup", then press the ENTER button.. Press the ▲ or ▼ button to select "Searching Connections",then press the ENTER button.The message "Configuring Anynet+ connection..." is displayed.When searching devices completes, the connected devices arelisted in the Anynet+ menu.Switching to the selected devices may take up to 2 minutes.You cannot cancel the operation during the switchingoperation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of found devices is not displayed.Although the TV automatically scans devices when it is turned on using the POWER button, devicesconnected when the TV is on or under a specific circumstance are not displayed in the device list.Therefore select "Searching Connections" menu to search devices.If you have selected external input mode by pressing the SOURCE button, you cannot use theAnynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.➣➣➣➣➣SetupAnynet+ (hDMI-CEC) : On Auto Turn Off : Yes Searching Connections Move Enter ReturnView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV PMove EnterReturn