English - 125Auto Wall-Mount Adjustment (Sold separately)Once the auto wall mount is installed, your TV’s position can be easily adjusted.TV Rear PanelAuto Wall-MountEX-LINK Cable(Not supplied)Entering the menu1. Press the ▲, ▼, ◄ or ► button on your remote control.The Wall Mount Adjustment screen is displayed.If the Wall Mount Adjustment screen is not displayed when clicking ona direction button while watching your TV, use the menu to display thatscreen.Press the MENU button to display the menu. Press the ▲ or ▼ button to select“Setup”, then press the ENTER button.Press the ▲ or ▼ button to select “External Settings”, then press the ENTERbutton.Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press theENTER button.Remembering the Position2. Adjust to the desired position using the ▲,▼,◄,► buttons.If you press an arrow button when no OSD is displayed on the TV screen,the Adjustment screen appears.Press the INFO button to reset. Press the ◄ or ► button to select “Yes”,then press the ENTER button. The position is initialized to the defaultsetting.3. Press the Blue button.Press the ▲ and ▼ buttons to select a save mode from either Position 1,Position 2 or Position 3 in order to save the current position.To not save the current position, press the RETURN button.When selecting a save mode, you cannot use the Color buttons.4. Press the ENTER button to save.When Position1 is selected, the message “Current position saved asPosition1” is displayed.5. Press the ENTER button.The saved Position appears on the left side of the OSD.Moving to the remembered position1. Complete Step 1 of “Entering the menu”.2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount tothe saved position.You can move the wall mount to one of the 3 pre-set positions by pressingthe Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.If you adjust the position after moving to a pre-set position, the position display will disappear.For installation, refer to the Installation Manual provided with the wall mount.For product installation and the installation and moving of the wall mount, make sure to consult a specializedinstallation company.This installation manual is to be used when attaching the wall mount to a wall. When attaching to other buildingmaterials, please contact your nearest dealer.The auto wall mount will not work when Anynet+ or WISELINK Pro is operating.LN40A750R1F, LN46A750R1F and LN52A750R1F models are not compatible with the old electrically powered wallmount model (WMN5090A).➣➣•••➣➣➣➣➣➣➣➣➣➣➣➣➣SetupV-ChipCaptionExternal Settings ►Entertainment : OffEnergy Saving : OffPIPSW UpgradeExternal SettingsMelody : MediumWall-Mount AdjustmentReturnEnterMoveSaveSelect a mode to Save.Position1Position2PositionMove Enter ReturnWall-Mount AdjusmentAdjust Save CenterINFO1 2 PositionWall-Mount AdjusmentAdjust Save CenterINFO1 2 Position1Position
