English - 25Resetting the Picture Settings to the Factory Defaults1. To select the desired picture mode, follow the “Changing the PictureStandard” instructions numbers 1 and 2. (see page 21)2. Press the ▲ or ▼ button to select “Picture Reset”, then press the ENTERbutton.3. Press the ▲ or ▼ button to select “OK” or “Cancel”, then press theENTER button.Press the EXIT button to exit.Each mode can be reset.➣Setting the xvYCCSetting the xvYCC mode to “On” increases detail and color space when watchingmovies from an external device (ie. DVD player) connected to the HDMI orComponent IN jacks.24. Press the ▲ or ▼ button to select “xvYCC”, then press the ENTERbutton.25. Press the ▲ or ▼ button to select “Off” or “On”.Press the ENTER button.“xvYCC” is available when the picture mode is set to “Movie”, and theexternal input is set to “HDMI” or “Component” mode.➣Detailed SettingsPicture OptionsPicture Reset ►PictureEnterDetailed Settings▲Dynamic Contrast : OffGamma : 0Color Space : AutoWhite BalanceFlesh Tone : 0Edge Enhancement : OffxvYCC : Off ►Move ReturnxvYCC :EnterMove ReturnOffOnPictureDetailed SettingsPicture OptionsPicture Reset ►OKCancel
