English - 14Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.OperationPlug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically and subsequently.1. Press the POWER button on the remote control.The message “Menu Language, Store Demo, Channels and Time will be set.”is displayed.Press the ENTER button, then “Select language of the OSD.” menuis automatically displayed. Press the ENTER button.2. Press the ▲ or ▼ button to select language, then press the ENTERbutton.The message “Select ‘Home Use’ when installing this TV in your home.” isdisplayed.3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then presstheENTER button. The message “Select the Antenna source to memorize.”is displayed.We recommend setting the TV to “Home Use” mode for the best picture inyour home environment.“Store Demo” mode is only intended for use in retail environments.If the unit is accidentally set to “Store Demo” mode and you want to returnto “Home Use” (Standard): Press the Volume button on the TV. When thevolume OSD is displayed, press and hold the MENU button on the TV for5 seconds.4. Press the ▲ or ▼ button to memorize the channels of the selectedconnection. Press the ENTER button to select “Start”.Air: “Air” antenna signal.Cable: “Cable” antenna signal.Auto: “Air” and “Cable” antenna signals.In Cable mode, you can select the correct signal source among STD,HRC, and IRC by pressing the ▲,▼,◄ or ► button, then press theENTER button. If you have Digital cable, select the cable systemsignal source for both Analog and Digital. Contact your local cablecompany to identify the type of cable system that exists in your particulararea.➣➣➣➣➣Plug & PlayMenu Language, Store Demo, Channels and Time willbe set.OKEnterPlug & PlaySelect ‘Home Use’ when installing this TV in your home.Home UseStore DemoEnterMovePlug & PlaySelect language of the OSD.Menu Language : EnglishEnterMoveEnglishEspañolFrançaisPlug & PlaySelect the Antenna source to memorize.AirCableAutoStartSkipEnterMoveStartStartPlug & PlayAuto Program in Progress.StopCable 3850%DTV Air : 02 Air : 11DTV Cable : 23 Cable : 21SkipEnterStartAuto ProgramSelects the cable system.AnalogDigitalHRC IRCHRC IRCSTDSTDEnterMove Skip
