Samsung MagicLAN SWL-2100N User Manual

Contents

129. Confirm the current settings of ESSID, Network Mode, and Utility directory and clickon Next.10. It takes a few seconds for copying the utility files and then click on Finish to completethe installation.11. Insert the PCMCIA card. Illuminating LED and Sound confirms the detection of yourPC card. Also you will see the PCMCIA Card icon on the right bottom of yourscreen.12. Check for the SAMSUNG 11Mbps Wireless PCMCIA LAN Card by right clickingon My Computer using the mouse. Select the Device manager and then NetworkAdapters. If you find the Yellow (?) sign on the adapter, it shows the installation isnot successful. Select the adapter and click on Remove. Restart your computer afteruninstalling (See the Uninstallation method in section 3.4) the driver to make thechanges effective. And refer to the Troubleshooting at the end of the manual.13. Right click on the Network Neighborhood using the mouse.14. Select Properties from the pop up menu. The network box appears and you see threemain tabs: Configuration, Identification and Access Control.15. Click on the Configuration tab and then click on the Add button. Select NetworkComponent Type box appears. Click on the Protocol then click the Add button.16. Select Network Protocols box appears. From the list of manufactures, click onMicrosoft. From the list of network protocols list, select NetBEUI, then click OK.17. The NetBEUI protocol is now installed. After clicking on OK return back toNetwork Component Type box.18. Repeat the step 15 and 16 to add IPX/SPX protocol.19. Repeat the step 15 and 16 to add TCP/IP protocol.20. Click on the TCP/IP option for setting the IP address for your computer. You canselect either Static or DHCP settings. If you use the static IP setup then enter the IPvalue, Subnet masking, DNS, Domain/Workgroup name, and Gateway Addressvalues. After setting these parameters appropriately, click OK to return to NetworkComponent Type and you can select the File and Printer Sharing options as well asthe Access to your computer by other users connected to that network by setting thecomputer sharing options. Click on OK.21. Screen message do you want to restart your Computer will pop up. Select Yes. Itwill shut down your computer and will restart.3.3 Installation procedure of SWL-2100P PCI CardImportant: Do not insert the PCI card until you are asked to do so, failure of which mayresult in unsuccessful installation of your PCI card.