Samsung MagicLAN SWL-2100N User Manual

Contents

29Solving ProblemsSymptom DiagnosisWindows 95/98 locks up after installing PCI card. The installation procedures may not have beenfollowed exactly. Turn off your PC and removethe PCI card. Restart your PC and run theinstallation program again as instructed in theinstallation guide.The system tray wireless monitor is always red. Make sure that all the clients have the same SSID.Set all clients to the same wireless channel in caseof Ad-hoc network mode.Make it sure that you are with in the range of anAccess Point (AP). If your PC can’t be associatedwith any AP, it cannot communicate with otherclients.If you cannot connect to one of the clients in thenetwork.Make it sure that all clients are up and are runningwith a blue taskbar icon.Make it sure that the client that you want tocommunicate with is within the range of an AP.Make sure that your TCP/IP is set properly andcorrectly.The NT event log lists the error: “Server Serviceterminated. Not enough Server Storage.”Reinstall the Windows NT service pack.In Windows NT, there is no wireless monitor icon inthe taskbar or the Samsung Adapter does notappear in the PC Card Control Panel applet.Make sure the PCMCIA device is started asAutomatic in the device applet of the ControlPanel.Double click on the PC Card icon in Control Panel.Click on Samsung Adapter and then on theproperties button. It should say the driver startedcorrectly.Make sure the drivers were installed correctly. If allelse fails, uninstall drivers and software throughAdd/Remove Program, remove the WLAN Cardand reinstall the drivers following the manual.

/ 32

Related manuals for Samsung MagicLAN AP SWL-2100AP