Samsung MagicLAN SWL-2100N User Manual

Contents

191. Power on your computer.2. Now insert the Installation CD. Select the Software Installation and click on Install.3. Shut down your computer and insert the PCI card and restart your computer.4. Right click on the Network Neighborhood using the mouse and select Properties.5. Select the Adapter. And click on Add.6. Since it is looking for the driver files, enter the path name D:\nt40 (where D is theCD drive of your Notebook PC) and click on Have Disk. It copies the driver files.And you can see Samsung 11Mbps Wireless LAN Card is added in your list ofadapters.7. Configure Wireless LAN Card box may appear. Set each parameter (I/O base,Interrupt) for the proper system configuration set up and other parameters (networkmode, ESS ID, and Tx rate) for the proper LAN card configuration.8. Click on Bindings.9. Click on the Protocols to access the network and share the resources.10. Select TCP/IP and you can select either DHCP or Static for the IP address. If youselect DHCP, you do not need to specify the IP address. In case of Static, enter IPvalue, Subnet masking, Gateway, and DNS values respectively. Also enter theWorkgroup/Domain name.11. You can add the optional protocols such as NetBEUI.12. After you add the TCP/IP protocol, it will ask you whether you want to restart yourcomputer or not. Click on Yes to make the changes effective. Now your network isestablished successfully, if your PCI card is detected. If you encounter someproblems during installation or if your card is not functioning properly, please referto the Troubleshooting at the end of the manual.4.3 Uninstallation Method:If you want to uninstall the PCMCIA/PCI card under Win NT, right click on the NetworkNeighborhood using the mouse. Select Properties and click on adapters. You will seeSAMSUNG 11Mbps Wireless PCMCIA/PCI LAN Card. Click on the card and then clickon Remove. The SAMSUNG 11Mbps Wireless PCMCIA/PCI LAN Card will be removedand now you can remove it from the PC Card slot of your computer.Important: Restart your computer to make the changes effective before you reinstall thedriver.