1828. Management ToolsSyncThru™ Web ServiceThis chapter gives you step-by-step instructions for setting up the networkenvironment through SyncThru™ Web Service.• Internet Explorer® 6.0 or higher is the minimum requirement forSyncThru™ Web Service.• Some menus may not appear on the display screen depending on thesettings or models. If so, it is not applicable to your machine.1What is SyncThru™Web Service?If you have connected your machine to a network and set up TCP/IP networkparameters correctly, you can manage the machine via SyncThru™ Web Service.Use SyncThru™ Web Service to:• View the machine’s device information and check its current status.• Change TCP/IP parameters and set up other network parameters.• Change the printer preference.• Set the email notifications advising of the machine’s status.• Get support for using the machine.• Upgrade machine software.2Required web browserYou need one of the following web browsers to use SyncThru™ Web Service.• Internet Explorer® 6.0 or higher• Chrome 4.0 or higher• FireFox 3.0 or higher• Safari 3.0 or higher3Connecting to SyncThru™ Web ServiceIPv4 supported web browser1 Start a web browser, such as Internet Explorer®, that supports IPv4addressing as a URL.Enter the machine’s IP address (http://xxx.xxx.xxx.xxx) in the addressfield and press the Enter key or click Go.You can get the machine’s IP address from the machine (see"Report" onpage 328).2 Your machine’s SyncThru™ Web Service website opens.
