Wireless network setup1562. Using a Network-Connected Machine11Using the WPS Settings menuIf your machine and access point (or wireless router) support Wi-Fi ProtectedSetup™ (WPS), then you can easily configure the wireless network settingsthrough the WPS Settings menu without the need for a computer.• If you want to use the wireless network using the infrastructure mode,make sure that the network cable is disconnected from the machine.Using the WPS (PBC) button or entering the PIN from the computer toconnect to the access point (or wireless router) varies depending on theaccess point (or wireless router) you are using. Refer to the user's guideof the access point (or wireless router) you are using.• When using the WPS button to set the wireless network, security settingsmay change. To prevent this, lock the WPS option for the current wirelesssecurity settings. The option name may differ depending on the accesspoint (or wireless router) you are using.Items to prepare• Check if the access point (or wireless router) supports Wi-Fi ProtectedSetup™ (WPS).• Check if your machine supports Wi-Fi Protected Setup™ (WPS).• Networked computer (PIN mode only)Choosing your typeThere are two methods available to connect your machine to a wireless network.• The Push Button Configuration (PBC) method allows you to connect yourmachine to a wireless network by pressing both the WPS Settings menu onthe control panel of your machine and the WPS (PBC) button on a Wi-FiProtected Setup™ WPS-enabled access point (or wireless router)respectively.• The Personal Identification Number (PIN) method helps you connect yourmachine to a wireless network by entering the supplied PIN information ona Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router).
