Media and tray462. Menu Overview and Basic SetupPreprinted paperWhen loading preprinted paper, the printed side should be facing up with anuncurled edge at the front. If you experience problems with paper feeding, turnthe paper around. Note that print quality is not guaranteed.• Must be printed with heat-resistant ink that will not melt, vaporize, orrelease hazardous emissions when subjected to the machine’s fusingtemperature for 0.1 second (about 170°C (338°F)).• Preprinted paper ink must be non-flammable and should not adverselyaffect machine rollers.• Before you load preprinted paper, verify that the ink on the paper is dry.During the fusing process, wet ink can come off preprinted paper, reducingprint quality.5Setting the paper size and typeAfter loading paper in the paper tray, set the paper size and type using thecontrol panel buttons.The paper setting in the machine and driver should match to print withouta paper mismatch error.• You change the paper setting set in the machine from Samsung EasyPrinter Manager program or SyncThru™ Web Service.- If your machine is connected to the local, you can set the machine’s settingfrom Samsung Easy Printer Manager > Advanced Setting > DeviceSettings (see "Using Samsung Easy Printer Manager" on page 252).- If your machine is connected to the network, you can set themachine’s setting from SyncThru™ Web Service > Settings tab >Machine Settings (see "Using SyncThru™ Web Service" on page 249).• You can set it using System Setup > Paper Setup > select you wantPaper Size or Paper Type button on the control panel.1 Select (Menu) button on the control panel.2 Press System Setup > Paper Setup > Paper Size or Paper Type.3 Select the tray and the option you want.4 Press OK to save the selection.
