Wireless network setup1592. Using a Network-Connected Machine3 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, selectSearch > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up windowappears, click the window and select Run Setup.exe.4 Review and accept the installation agreements in the installationwindow. Then, click Next.5 Select Wireless on the Printer Connection Type screen. Then, clickNext.6 On the Are you setting up your printer for the first time? screen, selectYes, I will set up my printer's wireless network. Then, click Next.If your printer is already connected on the network, select No, myprinter is already connected to my network.7 Select Using a USB cable on the Select the Wireless Setup Methodscreen. Then, click Next.8 After searching, the window shows the wireless network devices. Selectthe name (SSID) of the access point you want to use and click Next.If you cannot find the network name you want to choose, or if you want toset the wireless configuration manually, click Advanced Setting.• Enter the wireless Network Name: Enter the SSID of the access point(SSID is case-sensitive).• Operation Mode: Select Infrastructure.
