Basic faxing642. Menu Overview and Basic Setup4 Enter the destination fax number (see "Keypad letters and numbers" onpage 210).5 Press (Start) on the control panel. The machine starts to scan andsend the fax to the destinations.• If you want to send a fax directly from your computer, use SamsungNetwork PC Fax (see "Sending a fax from your computer" on page 234).• When you want to cancel a fax job, press (Stop/Clear) before themachine starts transmission.• If you used the scanner glass, the machine shows the message asking toplace another page.Sending a fax manuallyPerform the following to send a fax using (On Hook Dial) on the controlpanel.If your machine is a handset model, you can send a fax using the handset(see "Variety feature" on page 10).1 Place a single document face down on the document glass, or load thedocuments face up into the document feeder (see "Loading originals" onpage 48).2 Select (fax) on the control panel.3 Adjust the resolution and the darkness to suit your fax needs (see"Adjusting the document settings" on page 65).4 Press (On Hook Dial) on the control panel or lift the handset.5 Enter a fax number using the number keypad on the control panel.6 Press (Start) on the control panel when you hear a high-pitched faxsignal from the remote fax machine.Sending a fax to multiple destinationsYou can use the multiple send feature, which allows you to send a fax to multiplelocations. Originals are automatically stored in memory and sent to a remotestation. After transmission, the originals are automatically erased from memory.You cannot send faxes with this feature if you have chosen super fine as anoption or if the fax is in color.
