Samsung PL-42S4S Owner's Instructions Manual

Also see for PL-42S4S: Reference guide

Contents

30Storing Channels in Memory (Automatic Method)1 First, select the correct signal source (Air, STD, HRCand IRC). See steps on previous page.Press the MENU button. Press the ▲ or ▼ button toselect “Channel”, then press the ENTER button.2 Press the ▲ or ▼ button to select “Auto Program”,then press the ENTER button.3 Press the ENTER button.The PDP will begin memorizing all of the availablechannels.After all the available channels are stored, the Autoprogram menu reappears.Press the ENTER button to stop.4 Press the MENU button to exit.Note• The PDP automatically cycles through all of the available channels and stores them in memory.This takes about one to two minutes.➤➤ Quick way to access the Automatic Channel Setting: Just press the“AUTO PROG.” button on the remote control.Air/CATV : Air √Auto Program √Add/Delete √Fine Tune √LNA : On √Scan √ChannelTVMove Enter ReturnAir/CATV : Air √Auto Program √Add/Delete √Fine Tune √LNA : On √Scan √ChannelTVMove Enter ReturnAuto ProgramEnter ReturnStart