Selecting an External SignalYou can use PIP to view a signal from an external source, such as a VCR.1 Press the MENU button. Press the ▲ or ▼ button toselect “Picture”, then press the ENTER button.2 Press the ▲ or ▼ button to select “PIP”, then pressthe ENTER button.3 Press the ▲ or ▼ button to select “Source”, thenpress the ENTER button.4 Press the ▲ or ▼ button to cycle through all of theavailable signal sources:“TV”, “AV1”, “AV2”, “AV3”, “S-Video1”,“S-Video2”, “Component1”, “Component2”,“PC”, and “DVI”.The signal from these inputs will not appear if youhave not connected any equipment to the PDP'srespective input jacks.5 Press the MENU button to exit.Notes• The PIP function operates in Wide screen (16:9) and Panorama.• Using Multi-Screen in the Normal (4 : 3) or Zoom screen will change the size of the main screen toWide screen.48Mode : Custom √Custom √Color Tone : Normal √Color Control √Film Mode : Off √Size : 16:9 √PIP √† MorePictureTVMove Enter ReturnPIP : On √Source : TV √Swap √Size : √Position : √Air/CATV : Air √Channel : 4 √Sound Select : Main √PIPTVMove Enter ReturnPIP : OffSource : TVSwapSize :Position :Air/CATV : AirChannel : 22Sound Select : MainPIPTVMove Enter ReturnTVAV1AV2AV3S-Video1S-Video2†PIP : OffSource : TVSwapSize :Position :Air/CATV : AirChannel : 4Sound Select : MainPIPTVMove Enter Return…Component1Component2PCDVI
