33Changing ChannelsUsing the Channel ButtonsPress the CH or CH button to change channels.When you press the CH or CH button, the PDP changes channelsin sequence. You will see all the channels that the PDP has memorized.(The PDP must have memorized at least three channels.)You will not see channels that were either erased or not memorized.Directly Accessing ChannelsPress the number buttons to go directly to a channel. For example, to selectchannel 27, press “2” then “7”. The TV will change channels when youpress the second number.When you use the number buttons, you can directly select channels that wereeither erased or not memorized. To select a channel over 100, press the +100button. (For channel “112”, press the +100 button, then “1”, then “2”.To change to single-digit channels (0~9) faster, press “0” before the single digit.(For channel “4” press “0”, then “4”).Using the PRE-CH button to select the previous channelPress the PRE-CH button. The TV will switch to the last channel viewed.To quickly switch between two channels that are far apart, tune to onechannel, then use the number button to select the second channel. Then,use the PRE-CH button to quickly alternate between them.Adjusting the VolumeUsing the Volume ButtonsPress the VOL + or VOL – button to increase or decrease the volume.Using MuteUsing the MUTE ButtonAt any time, you can temporarily cut off the sound using the MUTE button.1 Press the MUTE button and the sound cuts off.The word “Mute” will appear in the lower-leftcorner of the screen.2 To turn mute off, press the MUTE button again, orsimply press the VOL + or VOL – button. Mute
