Selecting the PIP Screen1 Press the MENU button. Press the ▲ or ▼ button toselect “Picture”, then press the ENTER button.2 Press the ▲ or ▼ button to select “PIP”, thenpress the ENTER button.3 Press the ENTER button, then press the ▲ or ▼button to select “On”. The PIP image will appear inthe corner of the screen.• Pressing the ▲ or ▼ button will alternate between“On” and “Off”.Note• Check if the V-Chip Lock (refer to page 98) isON if the PIP On/Off will not function. PIP doesnot function when the V-Chip Lock is set to On.Change the setting to Off and try it again.4 Press the MENU button to exit.PIP SettingsViewing the Picture-in-PicturePIP screenMain screen TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 2Component 1TV OOOOOOOOOOOXOOOOOOOOOOXOOOOOOOOOOXOOOOOOOOOOXOOOOOOOOOOXOOOOOOOOOOXXXXOOOOOOXXXXPCOOOOOOXXXXDVIOOOOOOXXXXAV 1AV 2AV 3S-Video 1S-Video 2Component 1Component 2PCDVIO : PIP and Swap OperateX : PIP doesn’t Operate➤➤ Quick way to access the PIP mode: Just press the “PIP” button onthe remote control.➤➤ For further information on “Sound Select”, refer to page 65.47Mode : Custom √Custom √Color Tone : Normal √Color Control √Film Mode : Off √Size : 16:9 √PIP √† MorePictureTVMove Enter ReturnPIP : Off √Source : TV √Swap √Size : √Position : √Air/CATV : Air √Channel : 4 √Sound Select : Main √PIPTVMove Enter ReturnPIP : OffSource : TVSwapSize :Position :Air/CATV : AirChannel : 4Sound Select : MainPIPTVMove Enter ReturnOffOn
