Samsung PS50C7780 User Manual

Also see for PS50C7780: Quick start guide

21English03 Basic Features3DThis exciting new feature enables you toview 3D content. In order to fully enjoythis feature, you must purchase a pairof Samsung 3D Active Glasses (SSG-2100AB, SSG-2200AR, SSG-2200KR) toview 3D video.Samsung 3D Active Glasses are soldseparately. For more detailed purchasinginformation, contact the retailer where you purchased this TV.✎ The LED on the 3D emitter blinks only when sending a3D signal.✎ If there is any obstacle between the emitter and 3DActive Glasses, the proper 3D effect may not beobtained.■ 3D Mode: Select the 3D input format.✎ If you want to feel the 3D effect fully, please wearthe 3D Active Glasses first, and then select3D Mode from the list below that provides thebest 3D viewing experience.✎ When watching 3D images, turn on 3D ActiveGlasses.3D Mode OperationOff Turns the 3D function off.2D → 3D Changes a 2D image to 3D.Side by Side Displays two images next toeach other.Top & Bottom Displays one image aboveanother.Line by Line Displays the images for the leftand right eye alternately in rows.Vertical StripeDisplays the images for theleft and right eye alternately incolumns.CheckerBoardDisplays the images for theleft and right eye alternately inpixels.FrequencyDisplays the images for theleft and right eye alternately inframes.✎ “Side by Side” and “Top & Bottom” are availablewhen the resolution is 720p, 1080i and 1080pin DTV, HDMI and USB mode or set to PCconnecting through HDMI/DVI cable.✎ “Vertical Strip”, “Line by Line” and “CheckerBoard” are available when the resolution is set toPC connecting through HDMI/DVI cable.✎ “Frequency” displays the frequency (60Hz only)when the resolution is set to PC.■ 3D → 2D (Off / On): Displays the image for the left eyeonly.✎ This function is deactivated when 3D Mode set to“2D → 3D” or Off.■ Depth: Adjusts focus / depth in “2D → 3D” mode.✎ This function is only activated when the 3D Modeis “2D → 3D”.■ Picture Correction: Adjusts the images for the left andright eye.■ 3D Auto View (Off / On): If 3D Auto View is set to On,a “Side-By-Side” format HDMI signal with one of theresolutions below is automatically switched to 3D. Here,correct 3D information must be sent from the HDMI 1.3transmitter.✎ If a 3D failure occurs due to a 3D information error,set 3D Auto View to Off and manually select a3D Mode using the 3D button or correspondingmenu.✎ Support resolution (16:9 only)Resolution Frequency (Hz)1280 x 720p 50 / 60 Hz1920 x 1080i 50 / 60 Hz1920 x 1080p 24 / 30 / 50 / 60 HzResolution supported for HDMI PC modeThe resolution for HDMI PC mode is optimized to 1920 x1080 input.An input resolution other than 1920 x 1080 may not bedisplayed properly in 3D display or full screen mode.3D emitter3D[7790_GER]BN68-02696K-00L04.indb 21 2010-03-26 오후 4:14:59