ŝ2Şƈ Use this camera in the following orderInsert theUSB cableSet up thecamera driverBefore connecting the camera to a PC, via theUSB cable, you will need to set up the cameradriver. Install the camera driver that is contained inApplication software CD-ROM. (p.138)ſ To play back the movie clip on a PC, DirectX 9.0or later must be installed. (p.138)Take a picture. (p.29)Insert the supplied USB cable into the PC’s USBport and the camera’s USB connection terminal.(p.144)Check the camera’s power. If the power is turnedoff, press the camera button to turn it on.Take a pictureCheck thecamera’s powerCheck[Removable Disk]Open Window’s EXPLORER and search for[Removable Disk]. (p.145)ƃ If you use a card reader to copy the images on the memory card to your PC, the imagescould be damaged. When transferring the images taken with the camera to your PC, be sureto use the supplied USB cable to connect the camera to your PC. Please note that themanufacturer holds no responsibility for loss or damage of images on the memory card dueto the use of a card reader.Instructions
