ŝ64Şƈ You can check the recording status in the LCD.Pressing the Display/ Information button will changethe display as shown below.ƈ Some information will not display in the AUTO, MOVIE CLIPand SCENE mode.ſ Information displayed on the Finder LCD is the same as the information on the Rear LCD.ƈ Histogram shows you the distribution of brightness inrecorded images. If the bars in the histogram are highertowards the right, the image may be too bright.If the bars are higher on the left, the image may be toodark. If the lighting conditions are too bright to checkthe subject by using the LCD, checking the histogram willenable more precise exposure control for the shots.ƈ Current and last shot comparisonThe last captured image displays on the left side of the LCD and the pre-view image displayson the right side of the LCD. You can compare the two images to take next shot.PixelDark BrightDistribution of brightnessPressingthe ( )buttonPressingthe ( )button[ Normal display ] [ Image only ] [ Image & Full information ]Pressingthe ( )buttonPressingthe ( )button[ Current and last shot comparison ] [ Grid mark ] [ Histogram ]Display/ Information button ( )
