ŝ31Şƈ How to use the SHUTTER PRIORITY mode ( )This mode will set the shutter speed for automatic exposuredepends on the brightness of the object by automaticaperture value setting in the camera.Steps 1~2 are the same as those for AUTO mode.3. Select the SHUTTER PRIORITY mode by rotatingthe mode dial.4. Select the desired shutter speed by rotating the Frontjog dial (JOG1).5. Point the camera towards the subject and composeimage by using the LCD.6. Press the shutter button to capture an image.* High Shutter speeds can capture a moving object in a stillimage as if the object is not moving. Low Shutter speedscan capture a moving object with an ‘active’ effect. [ Shutter Priority mode ]ƈ How to use the MANUAL mode ( )The user can manually set both the aperture value andthe shutter speed.Steps 1~2 are the same as those for AUTO mode.3. Select the MANUAL mode by rotating the mode dial.4. Select the desired shutter speed or aperture valueby rotating a jog dial.- Front jog dial (JOG1) : Selecting the shutter speed- Rear jog dial (JOG2) : Selecting the aperture value5. Point the camera towards the subject and compose theimage by using the LCD.6. Press the shutter button to capture an image.[ Manual mode ]ƃ In the manual mode, you can change the aperture value and shutter speed after fixing theExposure value by rotating the EVC ring.ƃ Available shutter speed, by the aperture value- Over F2.2 : 15.0 ~ 1/1600 Sec.- Over F3.2 : 15.0 ~ 1/2000 Sec.- Over F4.0 : 15.0 ~ 1/2500 Sec.- Over F5.0 : 15.0 ~ 1/3200 Sec.- Over F7.1 : 15.0 ~ 1/4000 Sec.INFORMATIONRecording mode
