ŝ32Şƈ How to use the MySET mode ( )This mode allows users to save frequently used shootingsettings for later use.Steps 1~2 are the same as those for AUTO mode.3. Select the MySET mode by rotating the mode dial.4. Press the menu button and select the [ ] menu tab.5. Press the Right button and select the [Load Myset] menuby pressing the Up/ Down button.6. Press the Right button and select a desired MySETnumber by pressing the Up/ Down button.7. Press the OK button and a confirmation window willdisplay. Select the [Yes] menu and press the OK buttonto load the camera configuration saved in the MySETnumber and close the menu screen.8. Point the camera towards the subject and compose theimage by using the LCD.9. Press the shutter button to capture an image.Please see page 78 for details of the MySET shooting mode and menus.[ MySET mode ]ƈ How to use the MOVIE CLIP mode ( )A movie clip can be recorded for as long as the availablerecording time of the memory capacity allows.(A movie clip sets as 640X480 movie size and 25fps framerate can be taken up to 30 seconds.)Steps 1~2 are the same as those for AUTO mode.3. Select the MOVIE CLIP mode by rotating the mode dial.4. The MOVIE CLIP mode icon and available recordingtime will display on the LCD.5. Point the camera towards the subject and compose theimage by using the LCD. Press the shutter button andmovie clips are recorded for as long as the availablerecording time. Movie clips will still be recorded if theshutter button is released. If you wish to stop recording,press the shutter button again.* Image size and type are listed below.- Image size : 640X480, 320X240, 160X120(Selectable)- File type : *.avi(MJPEG)[ MOVIE CLIP mode ]Recording mode
