Samsung RF265A Series User Manual

setting up _1101 SETTING UP2. Disconnect two connectors ( 2 ) on the leftside door. To remove the water coupler fromthe hinge, twist and pull it from the hinge.Remove the water line ( 3 ) while pressing themarked part ( 4 ) of the water line coupler.If a red clip is on the coupler, it must beremoved before removing the tube.234Red Clip(1/4”)3. Pull and remove the hinge lever ( 5 ). Removethe ground screw ( 6 ) attached to the upperleft door hinges with a philips screwdriver (+).Remove the upper left and right door hinges( 7 ).5 674. Lift the door straight up to remove.5. Remove the screw ( 8 ) attached to thelower left and right door hinges with a philipsscrewdriver (+). Remove the 2 hex head bolts( 9 ) attached to the lower left and right doorhinges with an allen wrench (3/16”). Removethe lower left and right door hinges ( 10 ).Allen wrench1089CAUTIONREATTACHING THEREFRIGERATOR DOORSTo reattach the fridge doors after you have movedthe fridge to its final location, assemble the partsin reverse order.1. The Water Line must be fully Inserted to thecenter of transparent coupler to prevent waterleakage from the dispenser.2. Insert the clip in the top plate and check that itCenter of transparent coupler The Guide LinesDispenser- TYPE A - - TYPE B -By placing the 3 screws again ensurethat the wires are in not to damage theharness.DISASSEMBLING THE FLEX DOOR1. Take out the upper drawer by lifting it up.2. Take out the lower basket ( 1 ) by lifting thebasket up from the rail system.13. Press the fixing hook of rail system.CAUTIONDA68-02601A-16.indb 11 2018. 10. 8. 오후 4:32