operating _1702 OPERATING( 8 ) Filter Water filter usageThis icon will light up when you needto change the filter. After you useabout 300 gallons of water, the filterindicator lights up. (about 6 months).The icon will blink red for severalseconds when you open or closethe door. After you install the newwater filter, reset the filter indicator bytouching the Ice Type/Water Hold 3sec for Filter Reset button.• If water is not dispensing ordispensing slowly, you need toreplace the water filter becausethe water filter is clogged.• Some areas have largeamounts of lime in their water,which causes the water filter toclog more quickly.Cooling OffModeCooling Off mode (also called Shopmode), is designed for use by retailerswhen they are displaying refrigeratorson the shop floor. In Cooling Offmode, the refrigerator’s fan motorand lights work normally, but thecompressor does not run, and therefrigerator and freezer do not getcold. To start Cooling Off mode, touchand hold the Energy Saver buttonand the Freezer button for 5 secondsduring normal operation.The refrigerator chime sounds and thetemperature display flashes OF OF.To cancel Cooling Off mode, touchand hold the Energy Saver and theFreezer buttons again for 5 seconds.CHANGING THE WATER FILTERTo reduce risk of water damage to yourproperty DO NOT use generic brandsof water filters in your SAMSUNGRefrigerator.USE ONLY SAMSUNG BRAND WATER FILTERS.SAMSUNG will not be legally responsible for anydamage, including, but not limited to propertydamage caused by water leakage from the use ofa generic water filter. SAMSUNG Refrigerators aredesigned to work ONLY WITH SAMSUNG WaterFilter.The Filter light turns red to let youknow when it is time to changeyour water filter cartridge.To give you time to get a new filter,the red light comes on just beforethe capacity of the current filterruns out.(Red)Changing the filter on time provides you with thefreshest, cleanest water from your refrigerator.1. Shut off the water supply. Then, turn the waterfilter ( 1 ) about 1/4 turn, counter-clockwise.2. Pull the water filter ( 1 ) from the case filter ( 2 ).WARNING21• To change the water filter more easily,shut off the water supply valve.• Sometimes, it is hard to disassemble the waterfilter because impurities in the water cause itto stick. If you are having difficulties, grip thewater filter firmly and pull it hard.• When you pull thewater filter, a littlewater can leak fromthe opening. This isnormal.32To minimize the water leaks, keep the filtercartridge horizontal when you pull it.• To prevent overflow, empty the water filter tray( 3 ) and dry around the filter case ( 2 ).3. Insert the new filter into the filter case ( 4 ).4. Push the filter, and then turn it clockwise untilit locks.• If you have trouble inserting the waterfilter because of high water pressure,shut off the water supply valve.• The locked symbol should be lined up with theindicator line.45. Touch and “Ice Type/Water Hold 3 sec forFilter Reset” button( (Filter Reset) ) for about3 seconds to reset thewater filter. The colorof the indicator ( )changes from red tolight off.6. If you turned off the water supply, turn it back on.• For a replacement water filter, you canvisit your local home Improvementcenter or contact the Samsung Partsdistributor.• Be sure the replacement water filter has theSAMSUNG logo on the box and on the waterfilter. Link : http://www. samsungparts.comDA68-02601A-16.indb 17 2018. 10. 8. 오후 4:32