Samsung RF265A Series User Manual

Safety information _3circuits, which could cause a fire hazard fromoverheated wires.• If the wall socket is loose, do not insert thepower plug.- There is a risk of electric shock of fire.• Do not use a cord that shows cracks orabrasion damage along its length or at eitherend.• Do not bend the power cord excessively orplace heavy articles on it.- Do not pull or excessively bend the powercord.• Do not twist or tie the power cord.• Do not hook the power cord over a metalobject, place a heavy object on the powercord, insert the power cord between objects,or push the power cord into the space behindthe appliance.- When moving the refrigerator, be careful not toroll over or damage the power cord.- This may result in an electric shock or fire.• This appliance should be positioned in such away that it is accessible to the power plug.- Failing to do so may result in an electric shockor fire due to electric leakage.• Keep ventilation opening in the applianceenclosure or mounting structure clear ofobstruction.• Do not attempt to repair, disassemble, ormodify the appliance yourself.- Do not use any fuse(such as cooper, steelwire, etc.) other than the standard fuse.- hen repairing or reinstalling the appliance isrequired, contact your nearest service center.- Failing to do so may result in an electric shock,fire, problems with the product, or injury.• To get the best energy efficiency of thisproduct, please leave all selves, drawers andbaskets on their original position like as aboveillustration.• Never unplug your refrigerator by pulling on thepower cord. Always grip plug firmly and pullstraight out from the outlet.- Damage to the cord may cause a short-circuit,fire and/or electric shock.• Do not use aerosols near the refrigerator.- Aerosols used near the refrigerator may causean explosion or fire.• Do not install this appliance near a heater,inflammable material.• Do not install this appliance in a humid, oily ordusty location, in a location exposed to directsunlight and water (rain drops).• Do not install this appliance in a location wheregas may leak.- This may result in an electric shock or fire.• This refrigerator must be properlyinstalled and located in accordancewith the manual before you use it.• Connect the power plug in the proper positionwith the cord hanging down.- If you connect the power plug upside down,the wire can get cut off and cause a fire orelectric shock.• When moving the refrigerator, be careful not toroll over or damage the power cord.- This constitutes a fire hazard.• Make sure that the power plug is notsquashed or damaged by the back of therefrigerator.• Keep the packing materials out of reach ofchildren.- There is a risk of death from suffocation if achild puts the packing materials on his or herhead.• The appliance must be positioned so that theplug is accessible after installation.• You need to remove all the protective plasticfilm before you initially plug the product in.• The refrigerator must be safelygrounded.- Always make sure that you have grounded therefrigerator before attempting to investigateor repair any part of the appliance. Powerleakages can cause severe electric shock.• Never use gas pipes, telephone lines or otherpotential lightning attractors as an electricalground.- Improper use of the grounding plug can resultin a risk of electric shock. If it is necessaryto use an extension cord, use only a 3-wireextension cord that has a 3-blade groundingplug and a 3-slot receptacle that will acceptthe plug on the appliance. The marked ratingof the extension cord should be AC115-120 V, 10 A, or more. If a grounding adapteris used, make sure the receptacle box is fullygrounded.• If the power cord is damaged,have it replaced immediately by themanufacturer or its service agent.• The wall socket must be easily accessible sothat the appliance can be quickly disconnectedfrom the wall socket in an emergency.• It must be outside the area of the rear of theappliance.DA68-02601A-16.indb 3 2018. 10. 8. 오후 4:31