12_ setting upRemoving the freezer doorA few things to mention first.• Make sure that you lift the door straight up so the hinges are not bent or broken.• Be careful not to pinch the water tubing and wire harness on the door.• Place doors on a protected surface to prevent scratching or damage.1. With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, andthen disconnect the wires by gently pulling them apart 2 .2. Remove hinge screws 3 and the ground screw 4 by turning counter-clockwise, and takeoff the upper hinge 5 . Be careful that the door does not fall on you as you are removing it3. Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .4. Remove the lower hinge 8 from the bracket 9 by gently lifting the lower hinge upwards.Reattaching the freezer doorsTo reattach the freezer doors, assemble parts in reverse order21Be careful not to pinchthe water tubing andwire harness on thedoor.9345Be careful not to missthe parts of refrigerator.67- on some modelsDA99-01745T(EN)-GGH-0.4.indd 12 2010.12.16 10:20:18 AM