Ice OffThis icon will light up when you activate the “Ice Off” feature. In this case, the ice will not beproduced. When Ice Off blinks on the display panel, reinsert the bucket and/or make sure it’sinstalled properly.Child LockThis icon will light up when you activate the Child Lock function by pressing Child Lock button.Press this button again to reactivate. Use this function to prevent children from tampering withtemperature and filter settings.Exhibition ModeThis function is for store display refrigerators. It is not for customer use.In case of Exhibition Mode, the refrigerator works but doesn’t make cool air. Tocancel this mode, press the Power Freeze and Freezer buttons at the same time for 8seconds until a “Ding-dong” sound is heard and the unit will now cool.ControLLing thE tEMPEraturEBasic Temperature of Freezer and FridgeThe basic and recommended temperature of Freezer and Fridge compartments are -20ºC/3ºC.If the temperature of Freezer and Fridge compartments are too high or low, adjust thetemperature manually.Controlling the Freezer temperatureThe freezer temperature can be set between -14°C and -25ºC to suit your particular needs.Press the freezer button repeatedly until the desired temperature is shown in the temperaturedisplay. Keep in mind that foods like ice cream may melt at -16ºC.The temperature display will move sequentially from -14°C and -25ºC. When the display reaches-14ºC, it will begin again at -25ºC.Five seconds after the new temperature is set the display will again show the actual currentfreezer temperature. However, this number will change as the Freezer adjusts to the newtemperature.Controlling the Fridge temperatureThe refrigerator temperature can be set between 7ºC and 1ºC to suit your particular needs.Press the fridge button repeatedly until the desired temperature is shown in the temperaturedisplay.The temperature control process for the Fridge works just like the Freezer process.Press the fridge button to set your desired temperature. After a few seconds, the Fridge willbegin tracking towards the newly set temperature. This will be reflected in the digital display.The temperature of the freezer or the refrigerator may rise from opening the doors toofrequently, or if a large amount of warm or hot food is placed in either side.This may cause the digital display to blink. Once the freezer and refrigerator return to theirnormal set temperatures the blinking will stop.If the blinking continues, you may need to “reset” the refrigerator. Try unplugging theappliance, wait about 10 minutes and then plug back in.ExhibitionmodeCAUTION22_ operatingDA99-01745T(EN)-GGH-0.4.indd 22 2010.12.16 10:20:31 AM