14_ setting upLEVELLing thE rEfrigEratorNow that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that youcan make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectlyeven.The front of the refrigerator is also adjustable.Before levelling the refrigerator, remove the front leg coverOpen both the freezer and fridge doors, and then take off the front leg coverby turning the three screws counter-clockwise.When the Freezer door is lower than the fridgeInsert a flat-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise tolevel the freezer.When the Freezer door is higher than the fridgeInsert a flat-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise tolevel the fridge.Refer to the next section for the best way to make very minor adjustments to the doors.Legscrew DriverLegscrew DriverDA99-01745T(EN)-GGH-0.4.indd 14 2010.12.16 10:20:22 AM