setting up _1101 sEtting uP34521setting up your side-by-siderefrigerator2. Removing the freezer doorA few things to mention first.• Make sure that you lift the door straight up so the hinges are not bent or broken.• Be careful not to pinch the water tubing and wire harness on the door.• Place doors on a protected surface to prevent scratching or damage.1. With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and thendisconnect the wires by gently pulling them apart 2 .76Be careful not to pinchthe water tubing andwire harness on thedoor.2. Remove hinge screws 3 and the ground screw 4 by turning counter-clockwise, and take offthe upper hinge 5 . Be careful that the door does not fall on you as you are removing it3. Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .4. Remove the lower hinge 8 using a hex wrench.
