38_ operating1 2 312345Align the indicationmark with lockpositionCover filterSticker(month indicator)Changing the Interior Lights in the FreezerThe freezer light is located in the bottom of the auger motor case.1. Lift the lamp cover up and pull out with 2 hands in the direction of arrows.2. Replace the bulb with a new one.3. Reattach the light cover.CHanging tHE watEr fiLtErThe “Filter Indicator” light lets you know when it is time to change your water filter cartridge. To give yousome time to get a new filter, the light will come on up just before the capacity of the current filter runs out.Changing the filter on time provides you with the freshest, cleanest water from your fridge.1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.2. Place a sticker on the filter that dates six months in the future. For example, if you are replacingthe water filter in March, put the “SEP” (September) sticker on the filter to remind you to replacein September. Normally filter life is about every 6 months.3. Next, remove the fixed cap by turning it counter clockwise.4. Remove the new filter’s protective cap and remove the old filter.5. Position and insert the new filter into the filter housing.Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, lockingthe filter in position. Make sure that the indicator is lined up with the “lock” position. Do not overtighten.