English - 21SETTING UP3. Push the SodaStream 60L Carbonator into the Support.4. Lock the SodaStream 60L Carbonator into place by pressing the Lever.• The inner pressure of the Carbonator may make it diffi cult to press thelever down. Hold the lever as shown in the illustration on the right, andthen push down.• If you don’t lock the Carbonator into place, the refrigerator won’t producesparkling water.• If the Carbonator is not tightly connected to the Regulator, it will leak CO2gas, producing a hiss. If this occurs, repeat Steps 2, 3, and 4, makingsure that the Carbonator is fi rmly attached and locked into place.5. Press the Sparkling Maker button 3 seconds to run the Sparkling Making function. Wait about20 minutes. (the amount of time needed for a medium level of carbonation) while the refrigeratormakes sparkling water.• To make sparkling water, the refrigerator injects CO2 from the CO2 cylinder into water stored in theSparkling Water tank. The water enters the tank through the refrigerator’s water supply line.Press 3Press 3secondsseconds6. To remove any residual substances that may be in the water, dispense 2 or 3 large glass fulls ofSparkling Water and empty them into a sink.For more information about using the Sparkling Water function, see Using the Sparkling Water Function.DA68-03013A-03.indb 21DA68-03013A-03.indb 21 2014. 2. 25. 4:042014. 2. 25. 4:04