29 For CDMA Settings:3. Press CDMA Settings.4. Press the directional key up or down to choose Home Onlyor Automatic and press . For GSM Settings:5. Press GSM Settings.6. Press the directional key up or down to choose Automaticor Manual, and press .Voice CommandsVoice Commands is advanced speech recognition software thatcan be used to activate a wide variety of functions on your phone.Voice Commands software automatically voice activates allcontacts for voice dialing and searching, no pre-recording ortraining needed. Speak phone numbers naturally to dial, and usevoice commands to navigate phone menus.Voice Commands SettingsYou can adjust the settings and preferences by opening VoiceCommands menu. Using this menu, you can change thefollowing Voice Command features:1. From the home screen, press the Voice Commands key. The Voice Commands screen displays.2. Press the right soft key Settings.The followingoptions appear in the display:• Digit Dial Readout: Reads out the numbers pressed when dialinga phone number.• Menu Readout: Reads out the menu items as you scroll throughthem.• TXT Msg Readout: Reads out the text in a TXT message.Note: Picture or Video messages cannot be read back to you.• Choice List: If Voice Commands is not absolutely confident that ithas correctly identified a name or number, it can display a choicelist of up to three possibilities, and prompt you to confirm thecorrect one. You can control when choice lists appear by changingthe Choice Lists setting to the following:– Automatic: Voice Commands displays a choice list when it is notconfident it has identified the correct choice from among multiplealternatives.u810.book Page 29 Friday, May 1, 2009 12:03 PM
