31Call Call Digit DialingDigit Dial allows you to dial any phone number by simplyspeaking the digits into the phone. No training is necessary, andDigit Dial is programmed to understand natural speech.1. From the home screen, press the Voice Commands key.2. After a brief pause, a list of optional commands appears inthe display and the audio prompt "Please say a command"plays through the earpiece or speakerphone.3. Say “Call” at a distance of 3-12 inches from the phone in anatural voice.4. “Please say the name, number, voice mail or last number”plays through the earpiece or speakerphone.5. Say the area code and number that you want to dial intothe microphone, clearly and naturally.6. The number that you said is repeated through the speakerand your phone dials the number.7. If Voice Commands is not sure of the number that you said,a list of possible matches appears in the display.8. You’re asked to confirm the correct number as VoiceCommands displays the results.• Say “Yes” to confirm the number.• Say “No” to reject the number.• Say “Exit” to exit the Voice Command.• Say “Repeat” to have the selected number read one more time.Call Name DialingTo use Name Dial, you’ll need to have entries stored in yourContacts list. See page 47 for information on creating a Contactslist.1. From the home screen, press the Voice Commands key.2. After a brief pause, a list of optional commands appears inthe display and the audio prompt “Please say a command”plays through the earpiece or speakerphone.3. Say “Call” at a distance of 3-12 inches from the phone in anatural voice.4. “Please say the name, number, voice mail or last number”plays through the earpiece or speakerphone.5. To use Name Dialing, say the name of the contact that youwant to dial.u810.book Page 31 Friday, May 1, 2009 12:03 PM
