Samsung Repp SCH-R680 User Manual

Contents

108The FCC exposure limit incorporates a substantial margin ofsafety to give additional protection to the public and to accountfor any variations in measurements.SAR tests are conducted using standard operating positionsaccepted by the FCC with the phone transmitting at its highestcertified power level in all tested frequency bands. Although theSAR is determined at the highest certified power level, the actualSAR level of the phone while operating can be well below themaximum value. This is because the phone is designed tooperate at multiple power levels so as to use only the powerrequired to reach the network. In general, the closer you are to awireless base station antenna, the lower the power output.Before a new model phone is available for sale to the public, itmust be tested and certified to the FCC that it does not exceedthe exposure limit established by the FCC. Tests for each modelphone are performed in positions and locations (e.g. at the earand worn on the body) as required by the FCC.For body-worn operation, this phone has been tested and meetsFCC RF exposure guidelines when used with an accessory thatcontains no metal and that positions the mobile device aminimum of 1.0 cm from the body.Use of other accessories may not ensure compliance with FCC RFexposure guidelines.The FCC has granted an Equipment Authorization for this mobilephone with all reported SAR levels evaluated as in compliancewith the FCC RF exposure guidelines. The maximum SAR valuesfor this model phone as reported in the FCC equipmentauthorization grant are:• CDMA:– Head: 0.98 W/kg.– Body : 0.95 W/kg.– Product Specific: 0.75W/kg.– Simultaneous Transmission: 1.07 W/kg.• WLAN– Head: 0.10 W/kg.– Body: 0.10 W/kg.– Product Specific: 0.10 W/kg.– Simultaneous Transmission: 1.07 W/kg.SAR information on this and other model phones can be viewedonline at http://www.fcc.gov/oet/ea. To find information thatpertains to a particular model phone, this site uses the phoneFCC ID number which is usually printed somewhere on the caseof the phone.Sometimes it may be necessary to remove the battery pack tofind the number. Once you have the FCC ID number for aparticular phone, follow the instructions on the website and itshould provide values for typical or maximum SAR for a particular