5Use the Travel AdapterThe travel adapter includedwith your phone is aconvenient, light-weightcharger that rapidly chargesyour phone from any 120/220VAC outlet.1. Plug the Travel Adapterinto a standard 120 VACor 220 VAC wall outlet.Important!: For connection to an electrical supply not located in NorthAmerica, you must use an adaptor of the proper configuration forthe power outlet. Use of the wrong adapter could damage yourphone and void your warranty.2. If not installed, install the battery in the phone. (For moreinformation, refer to “Install the Battery” on page 6.)3. Insert the smaller end of the Travel Adapter into thecharger/accessory connector on the upper left side of yourphone.Warning!: Using excessive force when pressing on your phone’s screen maydamage the tempered glass surface and void the warranty see“Warranty Information” on page 116.Important!: You must unplug the adapter before removing the battery fromthe phone during charging to avoid damage.Low battery indicatorThe battery indicator ( ) in the upper-right corner of thedisplay indicates power level. Monitor the battery strength andensure your battery is adequately charged.• Five bars ( ) indicate a full charge.• An empty battery icon ( ) indicates a near empty battery.• A blinking empty battery icon ( ) and a tone sounding indicate youhave two to three minutes before the battery is too low to operate thephone.If you continue to use your phone without charging its battery, thephone will shut down.CorrectIncorrectIncorrectCorrect