117Call Alert1. From the Settings menu, select Call Settings ➔ Call Alert.The following Call Alert settings appear in the display:• Ring Only — Phone rings for an incoming call.• Caller ID + Ring — Phone rings and the display shows caller ID foran incoming call.• Name Repeat — Phone repeats displaying Contact name or callerID.2. Select the desired call alerting method.Auto AnswerAuto Answer enables your phone to automatically answer callsafter a period of time that you specify.1. From the Settings menu, select Call Settings ➔ AutoAnswer. The following settings appear in the display:• Off — Disables automatic answering of calls• After 1 Second — Phone automatically answers calls after 1second• After 3 Seconds — Phone automatically answers calls after 3seconds• After 5 Seconds — Phone automatically answers calls after 5seconds2. Select the desired call automatic answering method.Auto RetryAuto Retry automatically re-dials a number if the connection fails.Depending upon your location, the number of times your phoneautomatically dials the number may vary.1. From the Settings menu, select Call Settings ➔ AutoRetry. The following settings appear in the display:• Off — Disables automatic re-dialing of numbers• Every 10 Seconds — Phone automatically re-dials a numberevery 10 seconds• Every 30 Seconds — Phone automatically re-dials a numberevery 30 seconds• Every 60 Seconds — Phone automatically re-dials a numberevery 60 seconds2. Select the desired call automatic retrying method.TTY ModeYour phone is fully compatible with TTY equipment used by thosewho are hearing impaired. TTY equipment is connected to yourphone through the power/accessory connector on the left side ofthe phone. TTY Mode must be enabled before you can use yourphone with a TTY device.r600.book Page 117 Thursday, May 7, 2009 4:35 PM