Call Functions 22To manually call a number with pause(s) without storing it to yourContacts:1. Enter the number you wish to call.2. Press the Options soft key.A pop-up menu containing the following options appears inthe display:• P Pause — a hard pause (awaits input from you).• T Pause — a four-second pause.Tip: You can create pauses longer than four seconds by entering multipleT Pauses.3. Use the navigation keys to highlight the desired pauseoption.4. Press to enter the highlighted pause into yournumber sequence.5. Press to call the number.Making a Call — Speed DialingYou can store phone numbers and contact names in your phone’sContacts list. Speed Dialing lets you quickly and easily dial anycontact in your Contacts list by using that contact’s locationnumber in the list. You can assign and change location(speed dial) numbers for your contacts. (For more information,refer to “Assigning Speed Dial Numbers” on page 40.)One-Touch DialingSpeed Dial numbers 002 through 009 are special One-Touchdialing numbers. You can call the phone numbers stored in yourphone’s Contacts list and assigned Speed Dial numbers 002through 009 by pressing and holding a single key.Example: For Speed Dial number 003, press and hold until the nameand number appear in the display and the number is dialed.Two-Touch DialingMemory locations 010 through 099 are special Two-Touchdialing locations.Example: For Speed Dial number 013, briefly press , then press andhold until the name and number appear in the display and thenumber is dialed.Three-Touch DialingMemory locations 100 through 999 are special Three-Touchdialing locations.Example: For Speed Dial number 113, briefly press , briefly pressagain, then press and hold until the name and number appearin the display and the number is dialed.r600.book Page 22 Thursday, May 7, 2009 4:35 PM
