1342. If you are unable to connect with the device a pop-up appears in thedisplay. Press the Yes soft key to retry.Disconnecting from a Bluetooth DeviceIn standby mode with Bluetooth on, Turn the other, registered Bluetooth device off. The Bluetooth Connected(blue) icon ( ) is replaced by the Bluetooth On (black) icon ( ).From the Registered List, Highlight the device and press the Off (left) soft key ( ).Managing Your Registered ListFrom the Registered List,1. Highlight a device and press the Options soft key. The following optionsappear in the display.• Remove Device — Deletes the device from the Registered List.• Rename Device — Lets you change or replace the device name, as needed.• Device Info — Shows the type of device, status, address, the date when it waspaired with your phone, and the date the device was last connected with yourphone.2. Highlight the desired option and press the key to access that option.Bluetooth SettingsEnable/DisableSelecting this option turns your phone’s Bluetooth function on or off.Discovery ModeAllows other Bluetooth devices to “see” your phone for 1 minute. Select On for otherdevices to see and pair with your phone, or Off for no visibility.Note: Once you have paired your phone with another device, you do not need to set Discovery Mode to Onto reconnect with the other device (such as, after turning one or both devices off).Device NameShows your phone’s current Bluetooth name. You can change this name. Enter thenew name in the Enter New field and press the key. (For more information, see“Entering Text” on page 48.)Device InfoShows the Bluetooth Type, Status, and Address of your phone.
