54Open Contacts1. In standby mode, press the Menu key ( ), then press for Contacts.The following options appear in the display:• Find — Find a phone number By Name.Tip: You can also access the Find option from standby mode, by pressing the Contacts (right) soft key( ).• Add New Entry — Add a number or e-mail address to your Contacts.• Speed Dial — Assign a Contacts entry to a Speed Dial number. (See “SpeedDial” on page 63 for more information.)• Group — Review, send messages to, add Contacts to, or rename four out ofyour five groups. (See “Contacts Groups” on page 65 for more information.)• Memory Info — Display used and available memory for Contacts entries.Tip: To launch the Contacts menu using a voice command — In standby mode, press and hold untilthe phone prompts, “Say a command.” Say “Go to Contacts” into the microphone.2. Use the navigation keys to highlight the option of your choice, and pressthe key.Tip: You can also press the keypad number key that corresponds to the menu option number.Finding a Contacts EntryVoice MethodUse the VoiceSignal Lookup command to view contact information for any namedcontact stored in your Contacts list by saying the name.Note: The Lookup command shows the requested contact information in the display but does not dial anyphone numbers for the contact.To look up information for a specific contact:1. In standby mode, press and hold the key to launch VoiceSignal.“Say a Command” appears in the display and is pronounced through thespeaker.2. Say “Lookup”.VoiceSignal prompts you to “Say the name.”
