Call Functions 29Making a Call2-Touch DialingUse 2-touch dialing to speed dial Contacts from 010 through 099.1. In standby mode, press and release the number key representing the firstdigit of the desired Contact’s Location number.2. Press and hold the number key representing the second digit of the desiredContact’s Location number.Example: To speed dial the Contact assigned Location 035, press , then press and hold the key.3-Touch DialingUse 3-touch dialing to speed dial Contacts from 100 through 999.1. In standby mode, press and release the number key representing the firstdigit of the desired Contact’s Location number.2. Press the number key representing the second digit of the desiredContact’s Location number.3. Press and hold the number key representing the third digit of the desiredContact’s Location number.Example: To speed dial the Contacts entry assigned to Location 325, press , press , then pressand hold the key.Voice DialingThe voice recognition capabilities of your r610 are exceptional due to advanced,speaker-independent technology. This means you do not need to “train” your phoneto understand your voice. You can use your voice in a natural manner to dialnumbers.Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use VoiceDialing to make a call, you must end that call before you can use other Voice Commands. See “VoiceSVC” on page 95 for more information.Use the Call command to dial any number stored in your Contacts list by saying thename of the contact (Name Dialing). You can also use Call to dial any telephonenumber, even numbers not stored in your contact list, by speaking the individualdigits in the number (Digit Dialing).
