32Tip: Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when youreceive a call from that entry. See “Assigning a Picture to a Contacts Entry” on page 60.The phone continues to notify you of the call until one of the following events occur:• You answer the call.• The calling party ends the call.• The call is sent to voicemail.Call Notification FeaturesYour phone notifies you of a call in a variety of ways.• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,Medium/High, High, or Vibrate/High.• Different ring types or melodies to distinguish callers.• Name display with caller ID. (If the caller’s name is programmed into yourContacts).• Information about the last 90 each of incoming, missed, and outgoing calls areautomatically stored to a call log.Set Call Ringer Volume1. In standby mode, press the volume key on the left side of the phone.2. Press the volume key up or down to set the call ringer volume as desired.Adjust the Ringer1. In standby mode, press the volume key ( ) on the left side of the phone upor down. Options are:2. Press once you’re satisfied with the setting. The phone returns tostandby mode.Tip: You can also enter the Voice Calls – Volume sub-menu by pressing the Menu key ( ), then pressingthe , , , and keys. Use the Volume key on the left side of your phone to adjust theringer setting.Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The Vibrate/Ringicon ( ) appears in the display when the phone is in Vibrate/High mode.• Ringer Off • Medium• Vibrate • Medium/High• Low • High• Low/Medium • Vibrate/High
