Call Functions 31Answering a CallDialing a NumberTo dial a number using Voice Dial, do the following:1. In standby mode, press and hold the key.“Say a Command” appears in the display and is pronounced through thespeaker.2. Say “Call”.VoiceSignal prompts you to “Say the name or #.”3. Speak clearly and say the telephone number of the person you want to call.For example, say “7 8 1 9 7 0 5 2 0 0."If it recognizes the number, Voice Dial repeats it and dials the number. IfVoice Dial is not sure it has recognized the number, it displays a choice listof up to three numbers and prompts you with “Did you say?” followed bythe first number on the list.4. Say “Yes” to confirm the number or “No” to hear the next one, or use thekeypad to select the correct number from the list. (See See “Choice Lists”on page 97, for more information.)• Press the Repeat (right) soft key ( ) to say the name again.• Press the Settings (left) soft key ( ), then press the Exit (right) soft key ( )to exit VoiceSignal without dialing.Pause Dialing From a Contacts Entry• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pausesto pass and the dialing to complete.• If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s)from the number you are calling (credit card number, bank account number, andso on) and enter the appropriate response(s).Answering a CallIncomingWhen you receive a call, the phone displays one of the following:• If the caller can be identified, the caller’s number (or name if it’s in your Contacts)appears in the display.• If the caller cannot be identified, Call from unavailable #, Call from restricted #,or no number appears in the display.
