PAPER HANDLING3.6Using the Bypass TrayThe Bypass tray is located at the right side of your product. Itcan be closed when you are not using it, making the productmore compact.Use the bypass tray to print transparencies, labels, envelopes orpostcards in addition to making quick runs of paper types orsizes that are not currently loaded in the paper cassette.Acceptable print media are plain paper with sizes ranging from3.9x5.8, to Legal 8.5 x 14 inch, the largest size acceptable, andweighing between 16lb and 32lb.The following table summarizes the print media allowed as wellas their stacking height limit.Notes:• Always load only the print media specified in Specifications toavoid paper jams and print quality problems.• Do not hit the bypass tray or rest your hands on it; otherwise thetray may be damaged or detached from the product.• Remove any curl on postcards, envelopes, and labels beforeloading them into the multi-sheet bypass feeder.Paper Type Stacking Height LimitPlain Paper 100 sheets or 9mm (max)aa. The height is measured with the stack of sheets laid, withoutbeing touched by hands, on a flat surface.Envelope 10 envelopes or 9mm (max)aTransparency 30 sheets or 9mm (max)aLabel 30 sheets or 9mm (max)aCardstock 10 sheets or 9mm (max)a
