C OPYING 4.94CloneThe Clone feature prints multiple image copies from originaldocument on a single page. The number of images isautomatically determined by the original image size, so youcannot adjust the copy size.This special copy mode can be applied when you load documentonly using the document glass. So if a document is detected onthe ADF, the Clone does not work.1 Load the document to be copied on the document glass,and close the cover.2 Make sure that you have selected the required paper tray.See page 4.2.3 To enter the special copy mode, SCX-5312F users shouldpress Special Copy in the Copy mode (see page 4.5) andSCX-5112 users should press Autofit/Clone.4 Press Special Copy (Autofit/Clone on SCX-5112)repeatedly or use the navigation buttons until “CLONE”appears on the bottom line of the display.5 Press Mode/Enter (Enter on SCX-5112) to save theselection.6 If necessary, customise the copy settings incluing thenumber of copies, contrast and image type using thecontrol panel buttons. See “Setting Copy Options” onpage 4.6.NOTE: You cannot adjust the copy size by using the Zoom buttonwhile making a clone.7 Press Copy/Start to begin copying.8 When the copying is completed, press Stop/Clear tocancel the Clone mode.
