C OPYING 4.34Making Copies from the AutomaticDocument FeederUsing the ADF(Automatic Document Feeder), you can load up to30 documents (20lb, 75 g/m2) in one job. Ensure documents arein good condition, have the same thickness and weight, and thatall staples and paper clips have been removed.1 Feed the documents (up to 30 pages) face up into the ADFand adjust the document guides to the document size.Make sure that the bottom of the document stack matchesthe paper size marked on the ADF.2 SCX-5312F users should verify that the product is in theCopy mode. If necessary, press Mode/Enter to change themode into the Copy mode. In the Copy mode, the LCDdisplay shows:Note that you cannot make copies in the Fax mode. Theproduct will only sound an error beep.3 Make sure that you have selected the required paper tray.See page 4.2.4 Customise the copy settings incluing the number of copies,copy size, contrast and image type using the control panelbuttons. See “Setting Copy Options” on page 4.6.To clear the settings, use the Stop/Clear button.5 If necessary, you can use special copy features such ascollation and duplex copy.Document guidesCopy size Number of copies
