Getting Started 5Using the Travel ChargerImportant! Verify that the handset battery is installed prior toconnection. If the battery is not properly installedand the wall charger is connected, the handset maypower off and on continuously, preventing properoperation.1. Plug the flat end of the Travel Charger into the Power/Accessory Interface connector and the other end into astandard AC wall outlet.2. When charging is finished, remove the flat end from theinterface connector jack on the phone.Warning! A touch screen responds best to a light touch from thepad of your finger. Using excessive force or a metallicobject when pressing on the touch screen maydamage the tempered glass surface and void thewarranty.Note: Failure to unplug the wall charger before you remove thebattery, can cause damage to the phone.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk timeremain, the battery icon ( ) blinks and the device sounds awarning tone at regular intervals. In this condition, your phoneconserves its remaining battery power, not by turning off thebacklight, but by entering the dimming mode. For a quick
