Call Functions 49– Tap Speaker again to use the phone’s earpiece (see “Using theSpeakerphone During an Active Call” on page 51). Thegreen line will disappear when Speaker is not activated.• Mute/Unmute turn the onboard microphone either on or off.– Tap Mute during a call to mute the microphone. A green line willappear under the Mute button.– Tap Mute again to unmute the microphone. The green line willdisappear when Mute is not activated.• Headset connects to a Bluetooth headset.– Tap Headset during a call to activate a Bluetooth headset. Agreen line will appear under the Headset button.– Tap Headset again to de-activate the Bluetooth headset. Thegreen line will disappear when the Headset is not activated.• Press for more options:– Contacts: allows you to go to your Contact list.– Message: opens the Messaging application.– S Note: allows you to record a note during a call.– Noise reduction on/off: allows you to turn on the noisereduction feature when you are in a noisy area. Turn it Off whennot needed to conserve battery power.– My call sound: assigns a sound equalizer preset for use duringan active call. Sometimes you might need the sound to be softer,clearer, or optimized for one ear or the other.Placing a Call on HoldYou can place the current call on hold at any point during aconversation. You can also make another call while you havea call in progress if your network supports this service.1. While on a call, tap Hold . This action placesthe current caller on hold.2. You can later reactivate this call by tapping Unhold.To make a new call while you have a call in progress1. Tap Hold .2. Tap Add call to display the dialer.3. Enter the new number and tap .Once connected, the active call will appear in a largebox at the top of your screen and the call on hold willappear in a smaller box in the middle of your screen.HoldUnholdHold
