168Section 115. When you have finished, press the key.Changing the WAP ProfilesYou can set up 10 server profiles for the WAP browser.1. In Idle mode, press the Menu soft key to access Menumode.2. Select Settings. Highlight Connection Settings andpress the Select soft key or the key.3. Highlight MEdia Net and press the Select soft key or thekey.4. Select the profile you want.The following options are available: Profile Name: enter a name that you wish to assign to the HTTPproxy server. Homepage URL: set the address of your startup homepage.When the default homepage displays, you can delete it usingthe key and enter your own choice. Bearer: select the bearer to be used for each type of networkaddress accessed: GPRS or DATA. The remaining optionsdepend on the Bearer setting.When the bearer is set to GPRS: Proxy Setting: enter the WAP gateway address required toconnect to the Internet. User Name: enter the User ID required to connect to the GPRSnetwork. Password: enter the password required to connect to the GPRSnetwork. APN: enter the access point name used for the address of theGPRS network gateway.
